We took the Uniden USHC41 Security Kit and made it even better!  The Uniden AppHome Smart Home Security Kit USHC41 is a simple and full-featured base station that is perfect for building your own custom home security system. This DIY Home Security system allows you to monitor and control the security of your home via your smart phone. This gateway hub, with built-in siren, alerts you when a door or window is opened, and automatically turns on lamps to ward off intruders. 

With no monthly monitoring fees, it’s the perfect way to take home security into your own hands.

The Uniden Kit Includes:
1 x Gateway Hub
6 x Door/Window Sensors (2 from base security kit + 4 additional sensors added in)
4 x On/Off Switchers (2 from base security kit + 2 additional switchers added in)
2 x Wireless Motion Sensors
2 x Wireless Key FOB Remote Controls

15 TOTAL ITEMS!

• Uniden USHC41 AppHome Smart Home Security System + 10 Additional Items!

• Security System Kit Includes:
• One (1) Uniden Gateway Hub
• Six (6) Door/Window Sensors
• Four (4) Wireless Power On/Off Switchers
• Two (2) Wireless PIR Motion Sensors
• Two (2) AppHome Key FOB Remotes

• General Features:
• Color: White
• Base USHC41 Security System includes: a Smart home gateway hub with built in siren, 2 Door/Window Sensors and 2 Wireless Power Adapter Switchers
• Additional Items Includes: 4 additional Door/Window Sensors (for 6 total sensors), 2 Wireless Power Adapter Switchers (for 4 total switchers), 2 x Wireless Motion Sensors and 2 x Wireless Key FOB Remote Controls
• Allows you to monitor and control the security of your home via your smartphone
• Easy setup with ID/PW input from iOS/Android app
• Wireless Digital RF Transceiver module for sensor connection
• Create IF THIS THEN THAT (IFTTT) scenarios (If door open, then phone alert, then start recording)
• Supports 2-way interactive Alarm and recording Trigger
• Sends email and App alarm notification to mobile device
• Supports connection of Uniden AppCam 23, 24HD, 25HD, 26PT and Uniden Guardian G455, G755, G766 and G955
• Supports USHC-1 Door/Window Sensor; USHC-2 Power Plug Switcher; USHC-3 Motion Sensor; USHC-4 Remote Control
• Expandable up to 24 sensors and 4 camera systems

• Gateway Hub Specifications (1 x included):
• Operating Voltage: DC 12V/1A
• Ethernet Port: 10/100Mbps
• Sub-1G: 916.8MHz

• Door/Window Sensor Specifications (6 x total included (2 x from base security kit + 4 additional sensors added in)):
• Signal Frequency: 916.8MHz
• RF Range (line of sight): Up to 500′
• Battery Type: 2x CR2032, included 

• On/Off Switch Specifications (4 x included (2 x from base security kit + 2 additional switchers added in)):
• Input: 120V, 60Hz
• Load switching capacity: 1800W
• Resistive Load: 15A
• Signal Frequency: 916.8MHz
• RF Range (line of sight): Up to 500′
  
  
• Uniden AppHome Wireless PIR Motion Sensor (2 x included):
• Detects heat using Passive Infrared Sensor (PIR)
• Detects body movement by sensing heat
• 105° detection angle
• 40ft distance
• Powered by three (3) AA batteries, included

• Uniden AppHome Key FOB Remote (2 x included):
• Arm and Disarm your USHC41 Smart Home Security System as you enter or leave your home
• Panic button for emergencies
• Keychain hook attached
• Powered by CR2032 battery, included

• Power Adapter Specifications:
• Input: 100-240 ~ 50/60Hz, 500mA
• Output: 12V—1A

• Unit Dimensions:
• Gateway Hub: 1.3 x 6.0 x 4.4-inches (H x W x D)
• Uniden USHC-1:
  • Large piece sensor: 2.6 x 1 x 0.5-inches (H x W x D)
  • Small piece sensor: 2.6 x 0.5 x 0.4-inches  (H x W x D)
  • Overall: 2.6 x 1.5 x 0.5-inches (H x W x D
• Uniden USHC-2: 3.6 x 2.2 x 2.1-inches (H x W x D)
• Uniden USHC-3: 4.25 x 2.5 x 2.1-inches (H x W x D
• Uniden USHC-4: 2.6 x1.2 x 0.3-inches (H x W x D)

• Uniden USHC41 Security System (Base System):
• One (1) Smart Home Gateway Hub 
• Two (2) Door/Window Sensors 
• Two (2) On/Off Switchers 
• Double sided mounting tape 
• Screw pack 
• Power adapter
• Ethernet cable
• Manual

• Additional Items:
• Four (4) Door/Window Sensors 
• Two (2) On/Off Switchers 
• Two (2) Motional Sensors
• Two (2) Key FOB Remotes

• Notes:
• Base Kit: Model: USHC41 / UPC: 0 50633 40587 1
• AppHome Door/Window Sensors: Model: USHC-1 / UPC: 0 50633 40604 5
• Power On/Off Switchers: Model: USHC-2 / UPC: 0 50633 40605 2
• Wireless PIR Motion Sensors: Model: USHC-3 / UPC: 0 50633 40606 9
• Key FOB Remotes: Model: USHC-4 / UPC: 0 50633 40607 6

• Product Requirements
• Available power outlet
• AppHome app from Apple or Google Play Store
• Compatible Uniden AppCam Cameras (optional)
• Compatible Uniden AppHome sensors; remotes; switches (optional)